Question: Can you connect studio monitors to mixer?

How do I connect my monitor to my mixer?

How to Connect Stage MonitorsPlug in a cable into the AUX outputs on the sound mixer. Typically the AUX jacks require quarter-inch plugs. Insert the other end of the cable into the amplifier. Skip this step if you use powered speakers. Run a line from the amplifier to the speaker. Run amplifier and speaker tests.

Can you mix with studio monitors?

Whilst using a single studio monitor speaker can work ok for casual music listening it is strongly recommended to make full use of two studio monitors in a stereo configuration if you are mixing and want to produce music to a good standard.

Do I need a mixer for studio monitors?

You almost certainly do not need a standard analog mixer But my general advice is this: you dont need a mixer for a computer-based home recording studio; and trying to add one to your set-up may well cause more confusion and trouble than its worth.

How do I set up studio monitors to mix?

Studio Monitor PlacementSet up your desk so that your speakers are away from walls and corners. Verify studio monitor orientation. Your speakers should form an equilateral triangle with your listening position. The high-frequency driver should be the same height as your ears. Situate your mix position symmetrically.More items

How do I connect external speakers to my monitor?

Use the following steps to connect a pair of front desktop speakers to the computer:Position one speaker on each side of the computer monitor.Connect the audio cable to the green Speaker Out port on the back of the computer.Plug the speaker AC adapter into the electrical outlet and turn on the speakers.

How do you send an AUX to a monitor?

0:191:18Mackie Mix8 - Aux send stage monitor mix - YouTubeYouTube

Should I use headphones or studio monitors?

In general, mixing on studio monitors is always preferable. That doesnt mean that good work hasnt ever been done on headphones, but it just isnt all that common. Headphone mixes often lack depth and wind up being very in-your-face and loud.

Should I mix with monitors or headphones?

In general, mixing on studio monitors is always preferable. That doesnt mean that good work hasnt ever been done on headphones, but it just isnt all that common. Headphone mixes often lack depth and wind up being very in-your-face and loud.

Does a mixer improve sound quality?

Using a mixer in the field or in post production gives you more control over how your production sounds. By addressing your soundtrack in the same way you deal with your video, youll find you can achieve a dramatic increase in the quality of the audio in your video productions.

How far should studio monitors be away from the wall?

Place the speakers a minimum of 6 to 10 inches away from the wall — 2-3 feet is better; this will minimize bass buildup from the front wall.

Do monitors have audio outputs?

If your monitor does not play sound it is very likely that you do not have built-in speakers. Normally, computer screens lack the same, except for specific models. If this is your case, you can check however, if it has an output for headphones or external speakers.

Do I plug my speakers into computer or monitor?

TL;DR : Plug them into the BACK of the PC. Your PC is better equipped to handle sound than your monitor, Also, monitors accept signals from the PC and output them to speakers. There is not often a bypass built into monitors that allow signals to come from PC, bypass the monitor and go to the power amps.

Can you use aux sends for monitors?

To create a monitor mix, start by turning up one of the Aux sends on a channel strip. That sends the channel to an Aux Master, which is then sent to an output of the mixer and the stage monitor connected to the respective Aux output jack. You then need to balance the aux send levels to complement the performers needs.

What does AUX do on a mixer?

The aux sends on a mixer work independently of the main mix output and give you the ability to route multiple input channels to a single output while leaving out the channels you dont want to hear. There are generally two ways to use an Aux Send: Pre-fader or Post-fader.

Are studio headphones worth buying?

If a pair of studio headphones is well made, meets its design goals, and is a decent value, it should find acceptance in the audio creation industry. If enough pros like it and use it, it can become regarded as an industry standard.

Is it better to make beats with speakers or headphones?

Using Speakers Using your studio speakers is obviously the best way to mix (and to make beats) because they are supposed to give you the flattest frequency response, unlike headphones that can be very unpredictable. The reason why headphones are not reliable is because theyre all made with comfort in mind.

Reach out

Find us at the office

Ruebusch- Nedd street no. 4, 92509 George Town, Cayman Islands

Give us a ring

Fortino Moredock
+85 633 466 265
Mon - Fri, 10:00-22:00

Write us